Welcome to Würth New Zealand For trade customers only

Wire cable spray

Wire cable spray
WRECBLLUB-SPR-500ML

Art.-no. 08931058
EAN 4058794045031
Prices for customers after login
Wire cable spray

Art.-no. 08931058

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 20,000 products

Protective wax with OMC2 for lubricating and preserving

Does not drip as heat increases


Ideal for areas exposed to direct sunlight



Optimal creep properties


  • Good penetration of lubricating wax in very tight spaces

  • Lubricates hard-to-reach areas


Outstanding resistance to water


  • Ideally suited for outdoor use

  • Protects against moisture and water

  • Excellent corrosion protection


Contains additives with OMC 2 technology


  • Improved lubricating film

  • Longer-lasting rust protection

  • Low wear

  • Longer service life


Silicone, resin and AOX-free



Free from solid lubricants



Compatible with Viton and nitrile butadiene rubber elastomers

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

High-quality protective wax with OMC 2 technology, for lubrication and preservation

Instructions

Thoroughly pre-clean the parts with a brake cleaner. Spray evenly. Repeated application provides a thick protective film.

Chemical basis

Synthetic wax oxidant

Colour

Brown

Smell/fragrance

Characteristic

Density

0.775 g/cm³

Density conditions

at 20°C

Min. temperature conditions

-40 °C

Max. temperature conditions

120 °C

Corrosion protection period/category

No rust spots after 7 cycles

Corrosion protection period conditions

in accordance with DIN 51802

Behaviour in the presence of water

0-90

Conditions for behaviour in the presence of water

in accordance with DIN 51807-1

Resin-free

Yes

Silicone-free

Yes

AOX-free

Yes

Contents

500 ml

Shelf life from production

24 Month

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information