Window adhesive EXPERT MS
Window adhesive EXPERT MS
WNDWADH-EXPERT-MS-290ML
Register now and access more than 20,000 products
Can be used at any time of the year
Can be driven after 1 hour with airbag
Safety tested
- Drive-away time confirmed with crash test and TÜV certificate in accordance with FMVSS212
UV and weather resistance
Can be used without primer
Can be applied to most substrates without primer
Additional features
- Not conductive
- Suitable for vehicles with aerials.
- Resistant to UV and ageing
The Wurth active cleaner must be used for surface preparation. Do not position the vehicle on a lifting platform or hoist. Apply the adhesive while holding the gun vertically, starting in the middle of the bottom edge of the window. Please note the vehicle manufacturer's specifications regarding bead geometry. The application and drive-away times must be observed. The application information is recommended based on our tests and experience; you must perform your own tests before each application. Due to the large number of applications, storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service team provides technical information or acts as a consultancy service, no responsibility is taken by this service, except where the advice or information falls within the scope of our specified, contractually agreed service or the advisor has acted intentionally. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.
Datasheets(X)
Replacement glazing within passenger and commercial vehicles. Can also be used for other elastic bonds.
When applying the material, ensure a clean working environment. For proper and correct operation, it is essential that the product is used with the associated Würth system components. The work instructions provided with the product are to be observed during application.
Contents | 290 ml |
Container | Cartridge |
Chemical basis | MS polymer |
Colour | Black |
Min. skin-formation time | 10 min |
Density/conditions | 1.50 g/cm³ / at 20°C |
Drive-away time conditions | at 23°C and 50% relative humidity |
Max. open time /conditions | 15 min / at 23°C and 50% humidity |
Min./max. temperature resistance | -40 to 120 °C |
Tensile shear strength | 2.5 MPa |
Shelf life from production/conditions | 12 Month / at 5°C to 30°C |
Tensile strength | 2.3 MPa |
Smell/fragrance | Odourless |
Shore A hardness | 60 +/- 2 |
Product weight (per item) | 512.500 g |
Shelf life from production | 12 Month |
Density | 1.50 g/cm³ |
Full curing speed | 3 mm/d |
Drive-away time (with airbag) | 1 h |
Drive-away time (without airbag) | 1 h |
Breaking elongation | 180 % |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!