Welcome to Würth New Zealand For trade customers only

Trade Customers Only

Local Call 0800 683 040

Purchase On Account

Fast Delivery Nationwide

More Than 20,000 Products

Dry lubricant spray PTFE

Dry lubricant spray PTFE
DRYLUBSPR-PTFE-300ML

Art.-no. 0893550
EAN 4062856034772
Prices for customers after login
Dry lubricant spray PTFE

Art.-no. 0893550

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 20,000 products

Dry lubrication, does not attract dirt and dust

Eliminates squeaks, creaks and stiff movement


Offers lasting wear protection



Film thickness of 10 µm


Can be used for even the smallest tolerances in precision engineering



Very high resistance


  • Resistant to temperatures from –180°C to +260°C (briefly)

  • Permanently resistant to water, acids and alkalis


Mineral-oil-free



Silicone-free

Notice

Smokers must wash their hands after use. Smoking contaminated tobacco products may cause health-related issues.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Transparent, dirt-resistant dry lubricant for light to medium loads.

Instructions

Shake briefly before use. Spray a thin layer onto friction points or joints and allow to dry, drying time for a thin application: approx. 1-2 mins, drying time for a thicker application: approx. 5 mins.

Chemical basis

Polytetrafluoroethylene

Colour

Milky-transparent (protective film)

Density

0.6 g/cm³

Smell/fragrance

Characteristic

Min. temperature conditions

-180 °C

Max. temperature conditions

260 °C

Boiling point

-44 °C

VOC concentration (CH)

588.66 g/l

Silicone-free

Yes

Acid-free

Yes

Resin-free

Yes

Mineral oil-free

Yes

AOX-free

Yes

Contents

300 ml

Container

Aerosol can

Shelf life from production

24 Month

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information