Pneumatic drill DBM 10-RL Standard
Pneumatic drill DBM 10-RL Standard
DRL-PN-DBM10-NPT-10MM
Register now and access more than 20,000 products
Work precisely and efficiently
The ergonomic design, lightweight and low vibration
Maximum power transmission and long service life
Precision planetary gearbox
High-quality keyless chuck up to 3/8''(10 mm)
Increases the service lifetime and convenience (quick drill bit changing)
Conveniently located forward/reverse selector
One-handed foward/reverse switch operation
Handle exhaust
Directs air away from operator and workplace
- When used regularly, the machine should be lightly oiled via the pneumatic air supply every day. The use of a mist lubricator is recommended.
- Plug-in nipple not included in the scope of delivery
Datasheets(X)
Drill chuck holder | 3/8 inch x 24 UNF |
Max. drill chuck span width | 10 mm |
Max. idle speed | 1800 rpm |
Power output | 368 W |
Operating pressure | 90 psi |
Air consumption | 113 l/min |
Min. hose inner diameter | 10 mm |
Weight of machine | 1.1 kg |
Length x width x height | 201 x 39 x 132 mm |
Thread type x nominal diameter in inches | NPT 3/8 in |