Welcome to Würth New Zealand For trade customers only

Multigrade compressor oil Pro

Multi-grade compressor oil Pro
COMPROIL-MULTIGRADE-PRO-1000ML

Art.-no. 0892764123
EAN 4056807257402
Prices for customers after login
Multigrade compressor oil Pro

Art.-no. 0892764123

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 20,000 products

High-value synthetic oil with additive specifically tailored for use in air-conditioning compressor technology

Compatible with following refrigerants: R-23, R-125, R-134a, R-1234yf, R-227, R-413a, R-407c, R-410a, R-404a, R-507



Can be mixed with PAG oil and ester oil



Excellent lubricating effect


  • Longer compressor service life

  • High level of refrigerant compression in the compressor

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For universal maintenance and lubrication of vehicle air-conditioning compressors in the refrigerant circuit. Suitable for refrigerants R-134a, R-1234yf and other HFC and HFO refrigerants. Suitable for all cars, trucks, buses and agricultural machines equipped with R-134a or R-1234yf air-conditioning systems.

Instructions

Top up low compressor oil according to the amount recommended by the vehicle manufacturer and add to the air-conditioning circuit via the air-conditioning service unit.

Contents

1000 ml

Chemical basis

Phosphate

Density

0.979 g/cm³

Density conditions

at 20°C

Kinematic oil basis viscosity

85 cSt

Conditions for viscosity of oil basis

at 40°C, in accordance with ASTM D-445

VOC concentration (CH)

0 %

Min. flashing point

282 °C

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information