Trade Customers Only
Local Call 0800 683 040
Purchase On Account
Fast Delivery Nationwide
More Than 20,000 Products
MBN 10105 steel 10.9 flake zinc
Prices for customers after login
Register now and access more than 20,000 products
In accordance with DBL 9440.40 (silver-coloured zinc flake coating with lubrication integrated in seal, Cr(VI)-free) > VDA 235 – 104.42
The specified corrosion resistances apply for the corrosion tests according to DIN EN ISO 9227-NSS (salt spray mist testing), at the earliest 24 h after coating in the "as coated" state, i.e. before sorting, packaging, transporting and/or assembly. These values can be reduced through inevitable handling and assembly processes.
A transfer of the corrosion resistances from the salt spray mist test to real assembly and operating conditions is not possible in the majority of cases. When designing a connection both the combined materials and if necessary coatings as well as the environmental conditions during operation must be considered by the designer in the selection of a suitable corrosion protection coating.
μ tot = 0.09 – 0.14 (VDA 235 – 101)
Flange head screws reduce the risk of pretension loss caused by setting of contact surfaces. The surface pressure generated under the screw head during tightening is low compared to conventional hexagon heads (without flange), as the force is distributed over a larger contact surface.
Hexagon nut with flange and clamping piece MBN 13032 Steel 10, zinc flake coating, item number: 026391...
Catalogue page as PDF 1
CAD data (available after login)
Thread type x nominal diameter x pitch (d1)
M16 x 1.5
Head diameter (dc)
Head height (k1)
External drive (s1)
Flake zinc silver
Corrosion protection period
Hexagon head with flange
Fine pitch thread
Area of application
Utility vehicle construction
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!