Maintenance oil Multi
Maintenance oil multi
MAINTOIL-MULTI-400ML
Register now and access more than 20,000 products
Lubricates, cleans and maintains
- Lubricates locks, hinges, bushings, chains, door locks
- Stops creaking and squeaking and restores sliding properties of seized and jammed parts
- Cleans and maintains plastic and metal parts such as e.g. panelling and housing
Removes rust and protects against corrosion
- Loosens rusted bolts, pipe fittings, screws, nuts, joints, Bowden cables, shafts, locks etc.
- Infiltrates and displaces moisture around electronics and electrics
- Prevents corrosion on metals and electrical components, cable connections, relays, plugs, couplings etc.
- Prevents freezing up of lock cylinders and closures
Resin, acid and silicone-free
Does not attack rubber, paint or plastics
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Versatile multi-purpose spray
Shake the can before use, spray the parts and let it take effect briefly. After using, spray the can upside down until it is empty.
Contents | 0.4 l |
Chemical basis | Mineral oil |
Colour | Light yellow transparent |
Min./max. processing temperature for can | -10 to 40 °C |
Min./max. temperature conditions | -30 to 130 °C |
Shelf life from production | 24 Month |
Min. processing temperature for can | -10 °C |
Type of spray head | Standard spray head |
Max. processing temperature for can | 40 °C |
Min. temperature conditions | -30 °C |
Max. temperature conditions | 130 °C |
Min. flashing point | -80 °C |
Silicone-free | Yes |
Acid-free | Yes |
Resin-free | Yes |
AOX-free | Yes |
White oil-free/mineral oil-free | No |
VOC concentration (CH) | 76.57 g/l |
Kinematic oil basis viscosity | 30 cSt |
Material compatibility | NBR |
Conditions for viscosity of oil basis | at 40°C |
Container | Aerosol can |
Weight of content | 270 g |
Conditions to maintain shelf life from production | at 20°C |