Glue dispenser
Glue pouring tap
GLUTAP-(30KG-GLUECASK)
Register now and access more than 20,000 products
Easy to pour
By screwing on the glue pouring tap, you can dispense the contents of the 28 kg container cleanly and easily into the glue bottle or the glue roller.
Hinge plate attaches the glue pouring tap to the contact surface of the glue container.
- For a secure hold when pouring
- Hold the container firmly when emptying by tilting it
These instructions are recommendations based on our testing and experience; please carry out your own tests before each application. Due to the wide range of applications, and storage and handling conditions, we take no responsibility for the result of a specific application. If our free customer service provides technical information or advice, the provision of this service assumes no liability, except where the advice or information provided falls within the scope of our specified and contractually agreed service, or where an advisor has acted deliberately in bad faith. The consistent quality of our products is guaranteed. We reserve the right to make technical modifications and develop products.
Datasheets(X)
Lay the glue bucket on its side. Remove the grommet and open the cap. Remove the safety membrane. Screw on the glue pouring tap and set up the glue container. Screw on the hinged plate and the glue can be dispensed into the glue bottle or the glue roller reservoir container by opening the lever.
Material | Plastic |
Colour | Red, Black |
Product weight (per item) | 178.000 g |