Welcome to Würth New Zealand For trade customers only

Trade Customers Only

Local Call 0800 683 040

Purchase On Account

Fast Delivery Nationwide

More Than 20,000 Products

Fixit polymer based adhesive

Structural adhesive, FIXIT Transparent

Art.-no. 0890100370
EAN 4065746718998

Prices for customers after login
Fixit polymer based adhesive

Art.-no. 0890100370

Prices for customers after login

Exclusively for trade customers

Register now and access more than 20,000 products

Elastic, 1-component, high-modulus, MS polymer-based sealant.

Excellent adhesion on all kinds of surfaces

Does not contain silicone components or isocyanates

Suitable for indoor use only!

Not suitable for bonding or use on natural stone

Excellent adhesion on almost all solid and non-porous surfaces

Fast curing, no shrinkage and sandable

Very high resistance to ageing

Compatible and can be painted over (when wet) with water-based paints and 2-component varnishes

When painting over with synthetic varnishes, curing may be delayed

Due to the wide variety of paints and varnishes available, it is advisable to perform a compatibility test in advance.

The surface must be clean, dry, and free from dust, oil, grease and loose particles

To be applied between: +5°C and +35°C

Excellent chemical resistance to water, seawater, detergents, aliphatic solvents, oils and lubricants in the event of incidental splashing

Do not use in swimming pools due to the presence of chlorine

The tube guarantees a storage period of 12 months between +5°C and +25°C.

The instructions above regarding the application of the product are based on our experience and tests. However, the conditions when using the product are always individual and depend on several factors. As a result, the guidelines for the application of the product are always non-binding. The same also applies

to the explanations provided by our technical and sales departments. You are strongly advised to perform a test first. Technical modifications and further developments to the product may be implemented by us without obligation or prior notification. It is therefore also advisable

always to use the latest edition of our product information.

Product information


Safety data sheet

Certificates/ Documents



Application area

Finishing joints, expansion joints and joints in zinc works

Sealing joints in the automotive, aerospace and shipping industries

For lead, copper, stainless steel and galvanised material


290 ml

Chemical basis

MS polymer



Shore hardness A/conditions

38 / in accordance with DIN 53505

Full curing speed/conditions

3 mm/d / 23°C and 50% relative humidity, moisture curing

Min./max. processing temperature

5 to 35 °C

Min./max. temperature resistance

-40 to 90 °C

Min. tensile strength

2.4 N/mm²

Conditions for tensile strength

in accordance with DIN 53504

Max. change in volume

0 %

Cust. Mat. No.

Hazardous Material

Product information


Datasheets ()

CAD data  | 

Certificates/ Documents



Technical information