Welcome to Würth New Zealand For trade customers only

Trade Customers Only

Local Call 0800 683 040

Purchase On Account

Fast Delivery Nationwide

More Than 20,000 Products

Cut+Cool Ultra cooling lubricant

Cooling lubricant, Cut+Cool Ultra
CLLUB-(CUT-COOL-ULTRA)-5LTR

Art.-no. 0893050030
EAN 4062856833535
All versions
Prices for customers after login
Cut+Cool Ultra cooling lubricant

Art.-no. 0893050030

Prices for customers after login
Quantity
PU

Show availability in Würth shop
Exclusively for trade customers

Register now and access more than 20,000 products

Partly synthetic universal coolant

Excellent cooling effect with outstanding removal of chips



Especially low foam


Thanks to its low foaming tendency, it can also be used in areas with extremely low water hardnesses



High degree of stability and particularly resistant to micro organisms


For long service life with minimum maintenance



Excellent corrosion protection


Effective protection of workpieces, tools and system parts even with low concentrations



Strong lubricating performance


  • High cutting performance

  • Heat reduced due to less friction

  • Possible to increase the machining speed
Proof of Performance

Meets the requirements of Technical Rules for Hazardous Substances 611

Notice

Mixing rule: Always add concentrate to water and not the other way around!

Application area

Meets the requirements of Technical Rules for Hazardous Substances 611

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

Semi-synthetic water-miscible cooling lubricant, suitable for light to medium-heavy machining of metal involving chip production, including grinding.

Instructions

Stir Cut+Cool Ultra cooling lubricant into clean water (drinking water standard).


Grinding of steels and non-ferrous metals 4-6%


Cutting of steels and non-ferrous metals 6-10%

Contents

5 l

Chemical basis

Mixed synthetic mineral oil

Shelf life from production

12 Month

Density

1 g/cm³

Density conditions

at 20°C

Acid-free

Yes

Boron-free

Yes

Chloric

No

Application concentration: Initial use Subsequent dosing
Grinding steels and non-ferrous metals 4-6% 2-3%
Machining steels and non-ferrous metals 6-10% 3-5%
Refractometer factor: 2,3
Drilling and cutting oil Drilling and cutting oil Perfect Drilling and cutting paste Perfect Drilling and cutting oil Eco Drilling and cutting foam Cutting oil DVGW Cooling lubricant Ultra Cooling lubricant Ultra HD
Materials
Steel, alloyed steel xx xxx xxx xxx xxx xx xx xxx
High-alloy steel xx xxx xxx xxx xxx xx xx xxx
Cast iron, grey cast iron xx xxx xxx xx xxx x xx xxx
Tungsten carbide xx xxx xxx xx xxx x x xx
Non-ferrous base metal (copper, brass etc.) xx xxx xx xxx xxx x x xx
Titanium x xxx xxx xx xxx x x xx
Magnesium x xxx xxx xx xxx x x xx
Aluminium, aluminium alloys x xxx xxx xx xxx x xx xxx
Machining processes
Lathing, automatic lathes xx xxx x x x x xx xxx
Drilling, countersinking, reaming xx xxx xxx xxx xxx x xx xx
Deep drilling x xxx xxx xx xx x x xx
Sawing xx xxx xx xxx xxx x xx xx
Thread cutting xx xxx xxx xxx xxx xx xx xx
Thread forming, rolling xx xxx xxx xxx xxx x x xx
Milling x xxx x xx xx x xxx
Sanding x xxx x x x x xxx xx
Forming, rolling, bending x xxx xx xx xx x x xx
Punching, fine punching x xx xx xx x x x
Broaching, toothing x xxx xx xxx xxx x x x
Features
Basis Mineral oil Mineral oil with synth. ester Mineral oil with synth. ester Synth. ester Glycol and ester Ester Mineral oil Mineral oil
Viscosity (mm²/s) 12 25 Paste-like 35 n/a 5 66 76
Minimum quantity lubrication ⎷ ⎷
Free from mandatory warning symbols ⎷ ⎷ ⎷ ⎷
Can be used overhead ⎷ ⎷
DVGW-approved ⎷
Biodegradable/approved for use with food ⎷
Extremely high lubricating performance ⎷ ⎷ ⎷ ⎷ ⎷
Extremely long tool life ⎷ ⎷ ⎷ ⎷ ⎷ ⎷
Minimal smoking ⎷ ⎷ ⎷ ⎷ ⎷ ⎷
Extremely low consumption ⎷ ⎷ ⎷ ⎷
Good creeping properties ⎷
Free of boric acid ⎷ ⎷ ⎷ ⎷
Low-foaming ⎷ ⎷
Extremely high microbial stability ⎷ ⎷
Water hazard class 1 1 1 1 2 1 1 1
Formaldehyde-free ⎷ ⎷ ⎷ ⎷
Extremely gentle on the skin (amine-free) ⎷ ⎷ ⎷
xxx excellent suitability
xx good suitability
x less favourable suitability
⎷ applicable

Product information

Würth Catalogue (1)

Catalogue page as PDF 1

Datasheets (1)

Safety data sheet

Certificates/ Documents (0)

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU

TAP-(F.PLACANI-5LTR)

The tap makes it quick and easy to cleanly fill up and dispense liquids and helps with dosing large amounts of liquid in a short period of time.
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details