Angle plug connector for commercial vehicles
QCKPLGCON-(ANGL-CON)-D12MM
Art.-no. 088503 12
EAN 4011231816786
Individual price display after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 0800 683 040.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 20,000 products
- Allows quick, simple installation and removal of pipes and hoses.
- Fewer components means fewer potential points of leakage.
- Corrosion-resistant brass design
- Lower costs through quicker installation and repair.
- Meets international DIN, DOT and SAE regulations.
- Suitable for compressed air as operating medium.
- Reliably maintains maximum operating pressure in accordance with DIN 74324.
- Operates reliably at temperatures of -40 °C to +100 °C. At temperatures below +2 °C, please observe the requirements regarding compressed air quality.
- Compatible with hoses in accordance with DIN 74324.
Notice
All pipes, regardless of material, tend to vibrate and move once they reach a certain length. For this reason, secure the brake line pipes (diameter 5 to 16 mm) to the bodywork or chassis with rubberised pipe clamps where possible. Maintain clamp spacing of 1 m to maximum 1.20 m.
- Screw connectors meet the requirements of DIN 74324
- Screw connectors meet the requirements of the Department of Transport Federal Motor Vehicle Safety Standard (DOT FMVSS 106) and the Society for Automotive Engineers (SAE J1131)
- Screw connectors are TÜV tested and approved for use in pneumatic brake systems
- on commercial vehicles
Product information
Datasheets(X)
Application area
- For polyamide pipes Ø 6 to 16 mm
- For connecting components in the pneumatic brake system on commercial vehicles and auxiliary commercial vehicle systems
Outer diameter of pipe (T) | 12 mm |
Length (L) | 32.1 mm |
Material | Steel |