AMO® IV SCREW
Amo IV type 4 steel zinc plated RW 40
SCR-DWL-RW40-(A2K)-7,5X62MM
Art.-no.
0234941062
EAN 4062856952465
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 0800 683 040.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 20,000 products
For securing timber or steel elements to concrete or masonry.
- Zinc-plated steel, blue passivated
- Large washer head for improved uplift capacity
- Positive-locking, removable anchoring with no expansion pressure
- Load-bearing function is retained, even under thermal load
- RW40 drive for longer bit service life, improved power transmission and no ejection forces
- Immediate load-bearing capacity – no waiting after insertion
- Removable
- Virtually no expansion forces on insertion
Notice
Drill perforated and hollow blocks with a rotary drill (without impact mechanism)
Wurth Timber Connect Screws have been tested using a ‘Pull Out Test’ in 20MPa Concrete and are designed and manufactured based on a pull-through capacity of washer head in F5 timber with reference to:
- AS1720 1-2010 Australian standard for timber structures – design (Maximum working load = 2.28kN)
- EN1995 1-1:2005 Eurocode 5 design to timber structures part 1-1 (Maximum working load = 2.21kN)
Product information
Datasheets(X)
Application area
- 102 mm - suited for fixing timber bottom-plates to concrete slabs
- 62 mm - suited for steel frame installation into concrete slabs
- Both horizontal and vertical mounting of fixtures into concrete or brick is possible
 | |
Length (l) | 62 mm |
Thread diameter (d) | 7.5 mm |
Material | Steel |
Surface | Zinc plated |
Head type | Round washer head |
Head diameter (d(h/k)) | 22 mm |
Internal drive | RW40 |
Nominal drill hole diameter | 6.0 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!